Biblio
Export 17 results:
Filters: Author is A. Poursartip [Clear All Filters]
“An Orthotropic Integrated Flow-Stress Model for Process Simulation of Composite Materials – Part I: Two-Phase Systems”, ASME, J. Manufacturing Science and Engineering, vol. 141, pp. 031010-1 to 15, 2019.
, “Integration of Resin Flow and Stress Development in Process Modelling of Composites: Part II – Transversely Isotropic Formulation”, 52, vol. 23, pp. 3157-3171, 2018.
, “Integration of Resin Flow and Stress Development in Process Modelling of Composites: Part I - Isotropic Formulation”, J. Composite Materials, vol. 52, no. 23, pp. 3137-3155, 2018.
, “A Three-Phase Integrated Flow-Stress Model for Processing of Composites”, 117, pp. 152-164, 2018.
, “Calibration and Validation of a Continuum Damage Mechanics Model in Aid of Axial Crush Simulation of Braided Composite Tubes”, Composites Part A: Applied Science and Manufacturing, vol. 95, pp. 208-219, 2017.
, “Effective Calibration and Validation of a Nonlocal Continuum Damage Model for Laminated Composites”, Composite Structures, vol. 173, pp. 188-195, 2017.
, “A Two-Phase Integrated Flow-Stress Process Model for Composites with Application to Highly Compressible Phases”, Mechanics of Materials, vol. 109, pp. 51-66, 2017.
, “Axial crushing of triaxially braided composite tubes at quasi-static and dynamic rates”, Composite Structures, vol. 157, pp. 197-206, 2016.
, “A Differential Approach to Finite Element Modelling of Isotropic and Transversely Isotropic Viscoelastic Materials”, Mechanics of Materials, vol. 97, pp. 76-91, 2016.
, “Characterization of Strain-Softening Behaviour and Failure Mechanisms of Composites under Tension and Compression”, Composites Part A: Applied Science and Manufacturing, vol. 68, pp. 29-41, 2015.
, “A Structural Modelling Framework for Prediction of Damage Development and Failure of Composite Laminates”, Journal of Composite Materials, 2013.
, “Application of Response Sensitivity in Composite Processing”, J. Composite Materials, vol. 44, no. 15, 2010.
, “Computationally Efficient Pseudo-Viscoelastic Models for Evaluation of Residual Stresses in Thermoset Polymer Composites during Cure”, Composites Part A: Applied Science and Manufacturing, vol. 41, no. 2, pp. 247-256, 2010.
, “Closed Form Solution for Process-Induced Stresses and Deformation of a Composite Part Cured on a Solid Tool: Part II – Curved Geometries”, Composites Part A: Applied Science and Manufacturing, vol. 40, no. 10, pp. 1545-1557, 2009.
, “Experimental Study of Damage Propagation in Over-height Compact Tension Tests”, Composites Part A: Applied Science and Manufacturing, vol. 40, no. No. 12, 2009.
, “Progress In Composite Tube Crush Simulation”, International Journal of Impact Engineering, vol. 36, no. 5, pp. 711-719, 2009.
, “Response Sensitivities and Parameter Importance Studies in Composites Manufacturing”, Journal of Composite Materials, vol. 43, no. 6, pp. 621-659, 2009.
,