Biblio

Export 101 results:
Filters: Author is M. Taiebat  [Clear All Filters]
In Press
M. Yang, Taiebat, M., and Dafalias, Y. F., “SANISAND-MSf: a memory surface and semifluidized state enhanced sand plasticity model for undrained cyclic shearing”, Geotechnique, In Press.
2020
M. Yang, Barrero, A., and Taiebat, M., “Application of a SANISAND model for numerical simulations of the LEAP 2017 experiments”, in Model Tests and Numerical Simulations of Liquefaction and Lateral Spreading, B. Kutter, Manzari, M., and Zeghal, M. Cham, Switzerland: Springer, 2020, pp. 595-610.
Y. F. Dafalias, Taiebat, M., Rollo, F., and Amorosi, A., “On the convergence of rotational hardening variable at critical state”, Geotechnique Letters, vol. 10, no. 1, 2020.
M. T. Manzari, Ghoraiby, M. E., Zeghal, M., Kutter, B. L., Arduino, P., Barrero, A., Bilotta, E., Chen, L., Chen, R., Chiaradonna, A., Elgamal, A., Fasano, G., Fukutake, K., Fuentes, W., Ghofrani, A., Haigh, S., Hung, W. - Y., Ichii, K., Kim, D. S., Kiriyama, T., Lascarro, C., Madabhushi, M. S. P. G., Mercado, V., Montgomery, J., Okamura, M., Ozutsumi, O., Qiu, Z., Taiebat, M., Tobita, T., Travasarou, T., Tsiaousi, D., Ueda, K., Ugalde, J., Wada, T., Wang, R., Yang, M., Zhang, J. - M., Zhou, Y. - G., and Ziotopoulou, K., “LEAP-2017: comparison of the type-B numerical simulations with centrifuge test results”, in Model Tests and Numerical Simulations of Liquefaction and Lateral Spreading, B. Kutter, Manzari, M., and Zeghal, M. Cham, Switzerland: Springer, 2020, pp. 187-218.
M. T. Manzari, Ghoraiby, M. E., Zeghal, M., Kutter, B. L., Arduino, P., Barrero, A., Bilotta, E., Chen, L., Chen, R., Chiaradonna, A., Elgamal, A., Fasano, G., Fukutake, K., Fuentes, W., Ghofrani, A., Ichii, K., Kim, D. S., Kiriyama, T., Lascarro, C., Mercado, V., Montgomery, J., Ozutsumi, O., Qiu, Z., Taiebat, M., Travasarou, T., Tsiaousi, D., Ueda, K., Ugalde, J., Wada, T., Wang, R., Yang, M., Zhang, J. - M., and Ziotopoulou, K., “LEAP-2017 simulation exercise: calibration of constitutive models and simulation of the element tests”, in Model Tests and Numerical Simulations of Liquefaction and Lateral Spreading, B. Kutter, Manzari, M., and Zeghal, M. Cham, Switzerland: Springer, 2020, pp. 165-185.
A. Barrero, Taiebat, M., and Dafalias, Y. F., “Modeling cyclic shearing of sands in the semifluidized state”, International Journal for Numerical and Analytical Methods in Geomechanics, vol. 44, no. 3, pp. 371-388, 2020.
B. L. Kutter, Manzari, M. T., Zeghal, M., Arduino, P., Barrero, A., Carey, T. J., Chen, L., Elgamal, A., Ghofrani, A., Montgomery, J., Ozutsumi, O., Qiu, Z., Taiebat, M., Tobita, T., Travasarou, T., Tsiaousi, D., Ueda, K., Ugalde, J., Wada, T., Yang, M., Zheng, B. - L., and Ziotopoulou, K., “Numerical sensitivity study compared to trend of experiments for LEAP-UCD-2017”, in Model Tests and Numerical Simulations of Liquefaction and Lateral Spreading, B. Kutter, Manzari, M., and Zeghal, M. Cham, Switzerland: Springer, 2020, pp. 219-236.
C. Schmüdderich, Shahrabi, M. M., Taiebat, M., and Lavasan, A. A., “Strategies for numerical simulation of cast-in-place piles under axial loading”, Computers and Geotechnics, vol. 125, p. 103656, 2020.
2019
P. Mutabaruka, Taiebat, M., Pellenq, R. J. - M., and Radjai, F., “Effects of size polydispersity on random close-packed configurations of spherical particles”, Physical Review E, vol. 100, p. 042906, 2019.
A. Reyes, Adinata, J., and Taiebat, M., “Impact of bidirectional seismic shearing on the volumetric response of sand deposits”, Soil Dynamics and Earthquake Engineering, vol. 125, p. 105665, 2019.
A. Reyes, Adinata, J., and Taiebat, M., “Liquefaction hazard evaluation under bidirectional seismic shearing: Optimal ground motion intensity measures”, in 7th International Conference on Earthquake Geotechnical Engineering (VII-ICEGE), Rome, Italy, 2019, pp. 4694-4702.
M. Yang, Seidalinov, G., and Taiebat, M., “Multidirectional cyclic shearing of clays and sands: evaluation of two advanced plasticity models”, Soil Dynamics and Earthquake Engineering, vol. 124, pp. 230-258, 2019.
G. Seidalinov and Taiebat, M., “Nonlinear seismic site response analysis of soft clay deposits using SANICLAY-B constitutive model”, in 7th International Conference on Earthquake Geotechnical Engineering (VII-ICEGE), Rome, Italy, 2019, p. 4923--4930.
F. Palmieri, Taiebat, M., and Lizcano, A., “A power law characterizing the plastic strain rate of fine-grained soils under cyclic shearing”, in 7th International Conference on Earthquake Geotechnical Engineering (VII-ICEGE), Rome, Italy, 2019, pp. 4292-4300.
R. Chen, Wang, R., Zhang, J. - M., and Taiebat, M., “Seismic response of buried reinforced concrete box structures in layered liquefiable grounds”, in 7th International Conference on Earthquake Geotechnical Engineering (VII-ICEGE), Rome, Italy, 2019, pp. 4292-4300.
2018
J. Ramirez, Barrero, A., Chen, L., Ghofrani, A., Dashti, S., Taiebat, M., and Arduino, P., “Capabilities and limitations of different numerical tools in capturing seismic site performance in a layered liquefiable site”, Geotechnical Earthquake Engineering and Soil Dynamics V, vol. Numerical Modeling and Soil Structure Interaction (GSP 292). ASCE, Austin, TX, USA, pp. 79-88, 2018.
A. Barrero, Oquendo, W., Taiebat, M., and Lizcano, A., “Cyclic shearing response of granular material in the semi-fluidized regime”, Geotechnical Earthquake Engineering and Soil Dynamics V, vol. Numerical Modeling and Soil Structure Interaction (GSP 292). ASCE, Austin, TX, USA, pp. 100-107, 2018.
A. Rahmani, Taiebat, M., Finn, W. D. L., and Ventura, C. E., “Evaluation of p-y springs for nonlinear static and seismic soil-pile interaction analysis under lateral loading”, Soil Dynamics and Earthquake Engineering, vol. 115, pp. 438-447, 2018.
J. Adinata, Reyes, A., Barrero, A., and Taiebat, M., “An investigation on the effect of bidirectional seismic loading on volumetric strain and surface settlement of sand deposits”, Geotechnical Earthquake Engineering and Soil Dynamics V, vol. Seismic Hazard Analysis, Earthquake Ground Motions, and Regional-Scale Assessment (GSP 291). ASCE, Austin, TX, USA, pp. 237–246, 2018.
M. Rezania, Nguyen, H., Zanganeh, H., and Taiebat, M., “Numerical analysis of Ballina test embankment on a soft structured clay foundation”, Computers and Geotechnics, vol. 93, pp. 61–74, 2018.
J. Régnier, Bonilla, L. - F., Bard, P. - Y., Bertrand, E., Hollender, F., Kawase, H., Sicilia, D., Arduino, P., Amorosi, A., Asimaki, D., Boldini, D., Chen, L., Chiaradonna, A., DeMartin, F., Elgamal, A., Falcone, G., Foerster, E., Foti, S., Garini, E., Gazetas, G., Gélis, C., Ghofrani, A., Giannakou, A., Gingery, J., Glinsky, N., Harmon, J., Hashash, Y., Iai, S., Kramer, S., Kontoe, S., Kristek, J., Lanzo, G., di Lernia, A., Lopez-Caballero, F., Marot, M., McAllister, G., E. Mercerat, D., Moczo, P., Montoya-Noguera, S., Musgrove, M., Nieto-Ferro, A., Pagliaroli, A., Passeri, F., Richterova, A., Sajana, S., d’Avila, M. Paola Sant, Shi, J., Silvestri, F., Taiebat, M., Tropeano, G., Vandeputte, D., and Verrucci, L., “PRENOLIN: International Benchmark on 1D Nonlinear Site-Response Analysis - Validation Phase Exercise”, Bulletin of the Seismological Society of America, vol. 108, no. 2, pp. 876-900, 2018.
M. E. Kan and Taiebat, M., “Reply to the Discussion by A. Chugh on the paper entitled 'Framework to Assess Newmark-type Simplified Methods for Evaluation of Earthquake-induced Deformation of Embankment Dams'”, Canadian Geotechnical Journal, vol. 55, no. 4, pp. 603-606, 2018.
R. Chen, Taiebat, M., Wang, R., and Zhang, J. - M., “Seismic responses of an underground structure in layered liquefiable ground”, Soil Dynamics and Earthquake Engineering, vol. 113, pp. 124-135, 2018.
J. Ramirez, Barrero, A., Chen, L., Dashti, S., Ghofrani, A., Taiebat, M., and Arduino, P., “Site response in a layered liquefiable deposit: evaluation of different numerical tools and methodologies with centrifuge experimental results”, ASCE Journal of Geotechnical and Geoenvironmental Engineering, vol. 144, no. 10, p. 04018073, 2018.
2017
M. Taiebat, Mutabaruka, P., Pellenq, R. J. - M., and Radjai, F., “Effect of particle size distribution on 3D packings of spherical particles”, in Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media, Montpellier, France, 2017, vol. 140.

Pages