To download a thesis, click on the title in red and follow download instructions.
PhD Theses
- Mohammad Ahmadi, “Modeling Large Deformations during Cone
Penetration using FLAC and Verifying Predictions”, (Co-Supervisor:
P.M.Byrne), June 2000.
- M.P. Davies, “Piezocone Technology for the Geoenvironmental
Characterization of Mine Tailings", August 1999, 429pgs.
- Debasis Roy, "Mechanical Properties of Granular
Deposits from Self-Boring Pressuremeter Test", October, 1997.
- Renato Cunha, "Analysis of Self-Boring Pressuremeter
Tests on Sand," Oct. 1994, 279 pgs.
- Alex Sy, "Energy Measurements and Correlations
of the Standard Penetration Test (SPT) and Becker Penetration Test
(BPT)," Oct. 1993, 199 pgs.
- W. Patrick Stewart, "Insitu Measurement of Dynamic
Soil Properties with Emphasis on Damping”, April 1992, 379
pgs.
- John P. Sully, "Measurement of In-Situ Lateral
Stress during Full-Displacement Penetration Tests," September
1991, 485 pgs.
- John Howie, "Factor Affecting the Interpretation
and Analysis of Full Displacement Pressuremeter Tests in Sand," April
1991, 317 pgs.
- D. Gillespie, "Evaluating Shear Velocity and Pore
Pressure Data from CPT," Sept. 1990.
- F.D. Wickremesinghe, "Statistical Characterization
of Soil Profiles Using In Situ Tests," 1989.
- P.K. Robertson, "In-Situ Testing of Soil with
Emphasis on its Application to Liquefaction Assessment," December
1982.
- Yoginda
P. Vaid, “Comparative Behaviour of an Undisturbed Clay under
Triaxial and Plane Strain Conditions”, April 1971.
MASc Theses
-
S. Sandeep, “Development of a Gamma Logger to Work in Conjunction
with the CPT for Geotechnical and Environmental Applications",
1998, 87 pgs.
-
Henrik Kristiansen, “Induced Polarization and Complex Resistivity
Effects in Soils - Laboratory and In-Situ Measurements”, October,
1997.
-
Tim Boyd, "The Use of the Resistivity Piezocone (RCPTU) for
the Geoenvironmental Characterization of Sulfide Bearing Tailings
and Native Soils", September, 1996, 189 pgs.
- Daryl Wilson, "Analysis and Modifications of KBAT Hydraulic Conductivity Measurements", Master of Geological Engineering, Supervisor: Dr. RG Campanella, Thesis Project, 1996, 62 pgs.
-
Jodi Everard, "Characterization of a Hydrocarbon Contaminated
Site using In-Situ Methods", May 1995, 135 pgs.
-
Jiawei Wang, "Prediction of Pile Drivability from CPT and WEAP
Analysis," Oct. 1992, 134 pgs.
-
R. Thandava Murthy, "Shear Modulus and Damping Properties of
Sands from Cyclic Self-boring Pressuremeter Tests," October
1992, 184 pgs.
-
Matthew J. Kokan, "Dilatancy Characterization of Sands Using
the Resistivity Cone Penetration Test," May 1992, 133 pgs.
-
Ilmar Weemees, "A Resistivity Cone Penetrometer for Groundwater
Studies," August 1990.
-
Dan Zavoral, "Dynamic Properties of an Undisturbed Clay from
Resonant Column Tests," December 1990, 246 pgs.
-
Ian Hers, "Analysis and Interpretation of Cone-Pressuremeter
Test in Cohesive Soils," 1989.
-
David Brown, "Evaluation of the Tri-Star Vibrocompaction Probe," 1989.
-
Ross Hitchman, "Evaluation of the Phoenix Machine: A New Apparatus
for In-Situ Densification of Soil," November 1989.
-
D.G. LeClair, "Prediction of Embankment Performance Using In-Situ
Tests," (with P.K. Robertson) September 1988, 110 pgs.
-
C. Tsang, "Research Dilatometer Testing in Sands and in Clayey
Deposits," Sept. 1987, 173 pgs.
-
M. Davies, "Predicting Axially and Laterally Loaded Pile Behaviour
Using In-Situ Testings Methods," (with P.K. Robertson) September
1987, 305 pgs.
-
Bruce O'Neil, "An Evaluation of the Full Displacement Pressuremeter," (with
P.K. Robertson), October 1985.
-
J. Grieg, "Estimating Undrained Shear Strength of Clay from
Cone Penetration Tests," Sept. 1985.
-
P. Brown, "Predicting Laterally Loaded Pile Behaviour Using
the Pressuremeter," (with P.K. Robertson), July 1985.
-
N. Laing, "Sources and Receivers with the CPT," June 1985.
-
I. McPherson, "The Flat Plate Dilatometer," January 1985.
-
A. Rice, "The Seismic Cone Penetrometer," May 1984.
-
W.E. Berzins, "Drained and Undrained Soil Parameters Using the
Screw Plate Test," Oct. 1983.
-
S. Brown, "In-Situ Testing Techniques Applied to Embankments
over Soft Organic Soils," Oct. 1983.
-
Don J. Gillespie, “The Piezometer Cone Penetration Test”,
Dec. 1981.
-
Bruce Bosdet, “The UBC Ring Shear Device”, Oct 1980.
-
Ken K. Lum, “Stability of the Kamloops Silt Bluffs”,
March 1979.
-
Peter K. Robertson, “Strain Rate Behaviour of St. Jeanne-Vianney
Clay”, May 1075.
-
D.P. Mallawaratchie, “Plane Strain Creep Rupture of a Saturated
Undisturbed Clay”, June 1970.
-
Yoginda P. Vaid, “A Plane Strain Apparatus for Soils”,
Oct. 1968.
-
Ramesh Chandra Gupta, “Effect of Strain Rate and Structure on
Development of Cohesion and Friction in a Sensitive Clay”,
April 1967.
BASc Theses
- Chris Daniel, “An Investigation of the Factors Affecting Soil
Bulk Electrical Resistivity”, Geological Engineering, April
1997, 69 pages.
- Lori-Ann Wilchek, “Liquefaction Stability of Cohesionless Soils
Using In-Situ Testing”, Geological Engineering, April 1996,
102 pages.
- Mike Dowdle, “Cone Penetration and Pressuremeter Testing to
Evaluate the Before and After Effects of Vibro-replacement of Silt
and Sand”, Geological Engineering, April 1991, 95 pages.
- Ian Pilkington, “Using the Downhole and Crosshole Seismic Techniques
to Measure Soil Anisotropy in the Field”, Geological Engineering,
April 1991, 69 pages.
- Mark Pritchard, “The BAT Groundwater Monitoring System: An
Evaluation and Corrections to Cone Penetration Tests”, Geological
Engineering, March 1987, 153 pages.
- Duncan Moore, “Evaluation of the Vibrating Cone Penetrometer
and Its Effect on Cone Bearing and Pore Pressure” Geological
Engineering, April 1987, 81 pages.
- Mark Robertson, “Principles and Parameters for the Design of
a Portable Shear Wave Source”, Geological Engineering, April
1986, 83 pages.
- Peter Brown, “Prediction of Prefabricated Vertical Drain Performance
by use of the Piezometer Cone Test”, Geological Engineering,
July 1983, 73 pages.
top of page
Back
to Dr. Campanella's home page |