Biblio

Export 234 results:
Filters: Author is Banthia, N.  [Clear All Filters]
In Press
D. Y. Yoo, Banthia, N., Fujikake, K., Kim, Y. H., and Gupta, R., Fiber-Reinforced Cement Composites: Mechanical Properties and Structural Implications, Evolving Trends in Supply Chain Management: Complexity, New Technologies, and Innovative Methodological Approaches (ETS), In Press.
2018
O. Onuaguluchi, Ratu, R., and Banthia, N., The Effects of CaCl2-Blended Acrylic Polymer Emulsion on the Properties of Cement Mortar, Materials and Structures, vol. 51, no. 50, pp. 1–10, 2018.
D. Y. Yoo, Banthia, N., Lee, J. Y., and Yoon, Y. S., Effects of Fiber Geometric Property on Rate Dependent Flexural Behavior of Ultra-High-Performance Cementitious Composite, Cement and Concrete Composites, vol. 86, pp. 57–71, 2018.
M. J. Kim, Yoo, D. Y., Kim, S., Shin, M., and Banthia, N., Effects of Fiber Geometry and Cryogenic Condition on Mechanical Properties of Ultra-High-Performance Fiber-Reinforced Concrete, Cement and Concrete Research, vol. 107, pp. 30–40, 2018.
D. Y. Yoo, Banthia, N., and Yoon, Y. S., Geometrical and Boundary Condition Effects on Restrained Shrinkage Behavior of UHPFRC Slabs, KSCE Journal of Civil Engineering, vol. 22, no. 1, pp. 185–195, 2018.
A. Bhuttaa, Farooqa, M., Borges, P. H. R., and Banthia, N., Influence of Fiber Inclination Angle on Bond-Slip Behavior of Different Alkali-activated Composites under Dynamic and Quasi-Static Loadings, Cement and Concrete Research, vol. 107, pp. 236–246, 2018.
M. Farooq and Banthia, N., An innovative FRP Fibre for Concrete Reinforcement: Production of Fibre, Micromechanics, and Durability, Construction and Building Materials, vol. 172, pp. 406–421, 2018.
A. Bhutta, Farooq, M., and Banthia, N., Matrix Hybridization using Waste Fuel Ash and Slag in Alkali-Activated Composites and its Influence on Maturity of Fiber-Matrix Bond, Journal of Cleaner Production, vol. 117, pp. 857–867, 2018.
O. Onuaguluchi and Banthia, N., Scrap Tire Steel Fiber as a Substitute for Commercial Steel Fiber in Cement Mortar: Engineering Properties and Cost-Benefit Analyses, Resources, Conservation & Recycling, vol. 134, pp. 248–256, 2018.
D. Cui, Sun, W., and Banthia, N., Use of Tomography to Understand the Influence of Preconditioning on Carbonation Tests in Cement-based Materials, Cement and Concrete Composites, vol. 88, pp. 52–63, 2018.
Q. Wang, Banthia, N., and Wei, S., Water Permeability of Repair Mortars under an Applied Compressive Stress at Early Ages, RILEM Journal of Materials and Structures , vol. 51, no. 6, pp. 1–11, 2018.
2017
D. Y. Yoo, Banthia, N., Fujikake, K., Borges, P. H. R., and Gupta, R., Advanced Cementitious Materials: Mechanical Behavior, Durability, and Volume Stability, Advances in Materials Science and Engineering, vol. July 2017, p. 2, 2017.
C. Zanotti, Borges, P. H. R., Bhutta, A., and Banthia, N., Bond Strength between Concrete Substrate and Metakaolin Geopolymer Repair Mortar: Effect of Curing Regime and PVA Fiber Reinforcement, Cement and Concrete Composites, vol. 80, pp. 307–316, 2017.
F. Azhari and Banthia, N., Carbon Fiber Reinforced Cementitious Composites for Tensile Strain Sensing, ACI Materials Journal, vol. 114, no. 1, pp. 129–136, 2017.
D. Y. Yoo, Banthia, N., Zi, G., and Yoon, Y. S., Comparative Biaxial Flexural Behavior of Ultra-High-Performance Fiber-Reinforced Concrete Panels Using Two Different Test and Placement Methods, Journal of Testing and Evaluation ASTM, vol. 45, no. 2, pp. 624–641, 2017.
V. Bindiganavile, Mamun, M., Dashtestani, B., and Banthia, N., Correlating the Permeability of Mortar under compression with Connected Porosity and Tortuosity, Magazine of Concrete Research, vol. 18, no. 3, pp. 97–102, 2017.
O. Onuaguluchi and Banthia, N., Durability Performance of Polymeric Scrap Tire Fibers and its Reinforced Cement Mortar, Materials and Structures, vol. 50, no. 158, pp. 1–10, 2017.
P. H. R. Borges, Bhutta, A., Bavuzo, L. T., and Banthia, N., Effect of SiO2/Al2O3 Molar Ratio on Mechanical Behavior and Capillary Sorption of MK-based Alkali-Activated Composites Reinforced with PVA Fibers, Materials and Structures, vol. 50, no. 148, pp. 1–12, 2017.
P. H. R. Borges, Bhutta, A., Bavuzo, L. T., and Banthia, N., The Effect of the Alkaline Solution Content on the Mechanical Properties of MK-based PVA Fiber-Reinforced Geopolymers, Journal of Silicate Based and Composite Materials (epitoanyag-JSBCM), vol. 69, no. 1, pp. 15–20, 2017.
D. Y. Yoo and Banthia, N., Experimental and Numerical Analysis of the Flexural Response of Amorphous Metallic Fiber Reinforced Concrete, Materials and Structures, vol. 50, no. 1, pp. 64–77, 2017.
D. Y. Yoo, Banthia, N., and Yoon, Y. S., Experimental and Numerical Study on Flexural Behavior of Ultra-High-Performance Fiber-Reinforced Concrete Beams with Low Reinforcement Ratios, Canadian Journal of Civil Engineering, vol. 44, no. 1, pp. 18–28, 2017.
A. Bhutta, Borges, P. H. R., Zanotti, C., and Banthia, N., Flexural behavior of geopolymer composites reinforced with steel and polypropylene macro fibers, Cement and Concrete Composites, vol. 80, pp. 31–40, 2017.
D. Y. Yoo, Banthia, N., and Yoon, Y. S., Geometrical and Boundary Condition Effects on Restrained Shrinkage Behavior of UHPFRC Slabs, KSCE Journal of Civil Engineering, 2017.
D. Y. Yoo, Banthia, N., and Yoon, Y. S., Impact Resistance of Reinforced Ultra-High-Performance Concrete Beams with Different Steel Fibers, ACI Structural Journal, vol. 114, no. 1, pp. 113–124, 2017.
D. Y. Yoo and Banthia, N., Mechanical and Structural Behaviors of Ultra-High-Performance Fiber-Reinforced Concrete Subjected to Impact and Blast, Construction and Building Materials, vol. 149, pp. 416–431, 2017.

Pages