Biblio

Export 1169 results:
In Press
M. Zaki and Sayed, T., Automated Analysis of Pedestrians' Nonconforming Behavior and Data Collection at Urban Crossings, Transportation Research Record: Journal of the Transportation Research Board , In Press.
C. Zanotti, Borges, P. H. R., Bhutta, A., and Banthia, N., Bond strength between concrete substrate and metakaolin based geopolymer repair mortar: effect of curing regime and PVA fiber reinforcement, Cement and concrete Composites, In Press.
G. Rostagno, Tingley, B., and Zanotti, C., Bond strength of steel FRC repairs to concrete substrate: investigation on adhesion strength, friction, and bond enhancing mechanisms, fib Symposium. Maastricht, In Press.
M. H. Hussein, Sayed, T., Ismail, K., and Espen, V., Calibrating Road Design Guides Using Risk-Based Reliability Analysis: A Case Study, Journal of Transportation Engineering, ASCE, In Press.
K. J. Elwood, Baradaran-Shoraka, M., and Yang, T. Y., Collapse probability of existing concrete buildings: the evolution of seismic rehabilitation, in Performance Based Seismic Engineering - Vision for an Earthquake Resilient Society, Springer, In Press.
D. Wu, Tesfamariam, S., Stiemer, S. F., and Cui, J., Comparison of Seismic Safety of RC Frame Building before and after Wenchuan earthquake in Sichuan Province, ASCE Journal of Constructed Facilities, In Press.
J. Li, Hajimirsadeghi, H., Zaki, M., Mori, G., and Sayed, T., Cyclist’s Helmet Recognition Using Computer Vision Techniques, Transportation Research Record: Journal of the Transportation Research Board, In Press.
M. Farooq, A, B., Borges, P. H. R., Zanotti, C., and Banthia, N., Flexural behavior and single fiber-matrix bond-slip behavior of macro fiber reinforced fly ash-based geopolymers, fib Symposium. Maastricht, In Press.
M. Motamedi and Ventura, C. E., Inelastic Response of Steel Roof Deck Diaphragms with Nailed and Welded Connections, Journal of Engineering Structures, In Press.
A. Y. Bigazzi and Mohamed, A., Motivation and Implementation of Traffic Management Strategies to Reduce Motor Vehicle Emissions in Canadian Cities, Canadian Journal of Civil Engineering, In Press.
M. Saatcioglu, Tremblay, R., Mitchell, D., Ghobarah, A., Palermo, D., Simpson, R., Adebar, P., Ventura, C. E., and Hong, H., Performance of steel buildings and non-structural elements during the February 27, 2010 Maule (Chile) Earthquake, Canadian Journal of Civil Engineering, In Press.
C. Llorca, Moreno, A., Sayed, T., and Garcia, A., Risk Evaluation Of Passing Sight Distance Standards Based On Observational Data, Transportation Research Record: Journal of the Transportation Research Board, In Press.
A. Tageldin, Sayed, T., Zaki, M., and Azab, M., A Safety Evaluation of an Adaptive Traffic Signal Control System using Computer Vision, Advances in Transportation Studies, In Press.
C. Centeno, Ventura, C. E., and Ingham, J., Seismic Performance of a Six Storey Reinforced Concrete Masonry Building during the Canterbury Earthquakes, EERI Spectra, In Press.
M. Zaki, Sayed, T., and Shaaban, K., Using Drivers Jerks Profile in Computer Vision based Traffic Safety Evaluations, Transportation Research Record: Journal of the Transportation Research Board, In Press.
A. Y. Bigazzi and Lindsey, R., A utility-based bicycle speed choice model with time and energy factors, Transportation, In Press.
S. Tengattini and Bigazzi, A. Y., Validation of an Outdoor Coast-Down Test to Measure Bicycle Resistance Parameters, Journal of Transportation Engineering, Part A: Systems, In Press.
2017
C. Liu, Lee, J., Ma, J., and Elimelech, M., Antifouling Thin-Film Composite Membranes by Controlled Architecture of Zwitterionic Polymer Brush Layer., Environmental Science and Technology, vol. 51, no. 4, 2017.
A. Y. Bigazzi and Rouleau, M., Can Traffic Management Strategies Improve Urban Air Quality? A Review of the Evidence, Journal of Transport & Health, vol. 7B, pp. 111-124, 2017.
F. Azhari and Banthia, N., Carbon Fiber Reinforced Cementitious Composites for Tensile Strain Sensing, ACI Materials Journal, vol. 114, no. 1, pp. 129-136, 2017.
D. Y. Yoo, Banthia, N., Zi, G., and Yoon, Y. S., Comparative Biaxial Flexural Behavior of Ultra-High-Performance Fiber-Reinforced Concrete Panels Using Two Different Test and Placement Methods, Journal of Testing and Evaluation ASTM, vol. 45, no. 2, pp. 624-641, 2017.
S. Tengattini and Bigazzi, A. Y., Context-Sensitive, First-Principles Approach to Bicycle Speed Estimation, IET Intelligent Transport Systems, 2017.
A. Y. Bigazzi, Determination of active travel speed for minimum air pollution inhalation, International Journal of Sustainable Transportation, vol. 11, pp. 221-229, 2017.
M. Taiebat, Mutabaruka, P., Pellenq, R., and Radjai, F., Effect of particle size distribution on 3D packings of spherical particles, in Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media, Montpellier, France, 2017, vol. 140.

Pages